Specification
CD player:
Laser Semiconductor laser / Wavelength 790nm
Digital Sampling Frequency 44.1kHz
Frequency Response (100KO load) = 17Hz -0.02dB to 20.5KHz -0.02dB
Total Harmonic Distortion = 0.005% @ 1KHz (CDA), 0.012% (MP3 320kb/s)
Signal To Noise Ratio -109dB (A Weighted Relative to the maximum output level)
Digital outputs SPDIF Optical Toslink & SPDIF Isolated 0.5V 75O Co-axial

DAC:
Frequency Response (100KO load)
Low data rate 44.1/48KHz Filter 2 = 10Hz -0.05dB to 20KHz -0.1dB
Medium data rate 88.2/96KHz Filter 2 = 10Hz -0.05dB to 30KHz -1dB
High data rate 176.4/192KHz Filter 2 = 10Hz -0.05dB to 41KHz -1dB
Total Harmonic Distortion = 0.006% @ 1KHz (USB input @ 24bit 88.2KHz using ASIO driver)
Note to achieve best THD levels use ASIO drivers.
Signal To Noise Ratio -109dB (24bit 96KHz A Weighted Relative to the maximum output level)
Supported data rates = 32K (Optical/Toslink only), 44.1, 48, 88.2, 96, 176.4, 192KHz. Bit resolution 16 to 24bit

Digital inputs:
USB Isolated (24bit 44.1/48/88.2/96/176.4/192KHz)
Input 1 Optical/Toslink (24bit 32/44.1/48/88.2/96/176.4/192KHz)
Input 2 Optical /Toslink (24bit 32/44.1/48/88.2/96/176.4/192KHz)
Input 3 Isolated 75O Co-axial (24bit 32/44.1/48/88.2/96/176.4/192KHz)
Input 4 Isolated 75O Co-axial (24bit32/44.1/48/88.2/96/176.4/192KHz)
Digital outputs (via receiver & PLL) SPDIF Optical Toslink & SPDIF Isolated 0.5V 75O Co-axial
DAC’s parallel Wolfson WM8742
Maximum Analogue Output Level 2.18V (minimum load impedance 10kO)
Power Consumption: 15.5Watts at 230V (minimum 190V maximum 253V) @ 50Hz
Dimensions 430Wx95Hx325D / Required Space for operation: 435Wx180Hx400D Weight 9.7kg